| MRC |
Requirement Statement |
Characteristics |
| AEDX |
SHAFT STYLE |
ROUND |
| SR-1 |
MANUFACTURERS CODE |
18876 |
| ADAQ |
BODY LENGTH |
0.706 INCHES NOMINAL |
| ADAP |
MOUNTING BUSHING LENGTH |
0.313 INCHES NOMINAL |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
4.5 FREE AIR SINGLE SECTION |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ABXF |
SHAFT LENGTH |
1.000 INCHES NOMINAL |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AEFL |
MAXIMUM RUNNING TORQUE |
9.00 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION ABSOLUTE CONFORMITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 SOLDER STUD |
| ADAV |
III OVERALL DIAMETER |
1.937 INCHES NOMINAL |
| AEFK |
MAXIMUM STARTING TORQUE |
9.00 INCH-OUNCES |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| APXH |
TERMINAL LOCATION |
RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRJS |
FIXED TAP QUANTITY PER SECTION |
1 SINGLE SECTION |
| SR-1 |
MFR SOURCE CONTROLLING REFERENCE |
10128985-2 |
| ABPM |
BODY DIAMETER |
1.750 INCHES NOMINAL |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-3.0 TO 3.0 SINGLE SECTION |
| ABWV |
SHAFT DIAMETER |
0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
GOLD PLATED TERMINALS |
| AAQL |
BODY STYLE |
CYLINDRICAL BUSHING MOUNTED |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50 TO 0.50 SINGLE SECTION |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION GRAPH |
| ABHP |
III OVERALL LENGTH |
2.086 INCHES NOMINAL |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AAPN |
SECTION QUANTITY |
1 |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
40.0 SINGLE SECTION |
| CRKS |
TAP LOCATION TOLERANCE PER SECTION |
-1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| TEST |
TEST DATA DOCUMENT |
18876-10128985 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
10.000 KILOHMS SINGLE SECTION |
