| MRC |
Requirement Statement |
Characteristics |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END 0.562 INCHES 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.477 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
22.500 INCHES NOMINAL WORKING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.500 INCHES |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGM |
MAXIMUM OPERATING PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CQBD |
BURST TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END 12.0 DEGREES 2ND END |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END ELBOW 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END UNF 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRDW |
HYDROSTATIC TEST PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END SWIVEL NUT, FLARELESS 2ND END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| AARX |
INSIDE DIAMETER |
0.321 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
