| MRC |
Requirement Statement |
Characteristics |
| AASK |
HEAD STYLE |
PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| FEAT |
SPECIAL FEATURES |
SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| STYL |
STYLE DESIGNATOR |
STRAIGHT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS20392-12C97 |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| CQPJ |
PIN CHAMFER ANGLE |
14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| CRRG |
PIN HEAD DIAMETER |
1.171 INCHES MINIMUM AND 1.203 INCHES MAXIMUM |
| HGTH |
HEIGHT |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| ABMZ |
DIAMETER |
0.994 INCHES MINIMUM AND 0.996 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL |
| CQSX |
SHEAR STRENGTH |
117820 DOUBLE POUND |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.196 INCHES NOMINAL |
| ABPB |
UNDER HEAD LENGTH |
3.303 INCHES MINIMUM AND 3.323 INCHES MAXIMUM |
| AAZP |
CHAMFER LENGTH |
0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| ABRC |
FIRST HOLE DIAMETER |
0.161 INCHES MINIMUM AND 0.181 INCHES MAXIMUM |
