| MRC |
Requirement Statement |
Characteristics |
| AHRV |
TUBING WALL CONSTRUCTION STYLE |
STRAIGHT SEAM SINGLE TUBING SEGMENT |
| ACJL |
BEND ANGLE IN DEG |
15.0 ALL BENDS E-PLANE |
| STDC |
(NON-CORE DATA) SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-14550 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-T-10727 MIL SPEC 2ND TREATMENT RESPONSE MIL-C-14550 MIL SPEC SINGLE TREATMENT RESPONSE |
| FLEX |
FLEXIBILITY |
FLEXIBLE SINGLE TUBING SEGMENT |
| SFTT |
SURFACE TREATMENT |
COPPER AND TIN SINGLE TUBING SEGMENT OUTSIDE SURFACES COPPER ALL FLANGE INSIDE SURFACES |
| MDCL |
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM B103-77 ASSN STD SINGLE MATERIAL RESPONSE ASTM B122-77 ASSN STD SINGLE MATERIAL RESPONSE |
| AAJD |
THREAD CLASS |
2B SECOND FLANGE FIRST CONNECTION FACILITY 3B SECOND FLANGE SECOND CONNECTION FACILITY |
| AHSX |
FLANGE INSIDE WIDTH |
2.835 INCHES MINIMUM AND 2.845 INCHES MAXIMUM FIRST FLANGE 2.835 INCHES MINIMUM AND 2.845 INCHES MAXIMUM SECOND FLANGE |
| CTCJ |
FLANGE STYLE |
CONTACT TYPE FIRST FLANGE CONTACT TYPE SECOND FLANGE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
DESIGN CONTROL REFERENCE |
TVS-86026 |
| MATT |
MATERIAL |
COPPER ALLOY 510 SINGLE TUBING SEGMENT COPPER ALLOY ALL FLANGE |
| SR-5 |
MANUFACTURERS CODE |
06351 |
| THSD |
THREAD SERIES DESIGNATOR |
UNF SECOND FLANGE FIRST CONNECTION FACILITY UNF SECOND FLANGE SECOND CONNECTION FACILITY |
| AHTA |
FLANGE OUTSIDE HEIGHT |
2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM FIRST FLANGE 4.490 INCHES MINIMUM AND 4.510 INCHES MAXIMUM SECOND FLANGE |
| STYL |
STYLE DESIGNATOR |
OFFSET BEND TYPE |
| CXBB |
WAVEGUIDE CENTER TO CENTER DISTANCE |
0.730 INCHES NOMINAL |
| AHSF |
FLANGE QUANTITY |
2 |
| CSQT |
FLANGE CONNECTING FACILITY AND QUANTITY |
10 UNTHREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY 10 THREADED HOLE SECOND FLANGE FIRST CONNECTION FACILITY 10 THREADED HOLE SECOND FLANGE SECOND CONNECTION FACILITY |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES SECOND FLANGE FIRST CONNECTION FACILITY 0.250 INCHES SECOND FLANGE SECOND CONNECTION FACILITY |
| AHTN |
FLANGE CONNECTING HOLE DIAMETER |
0.262 INCHES MINIMUM AND 0.268 INCHES MAXIMUM FIRST FLANGE SINGLE CONNECTION FACILITY |
| CTFD |
WAVEGUIDE LENGTH |
8.660 INCHES NOMINAL |
