| MRC |
Requirement Statement |
Characteristics |
| AKNA |
INCLOSURE TYPE |
ENCASED |
| AGTA |
BASIC SHAPE STYLE |
RECTANGULAR OR SQUARE |
| ABKW |
OVERALL HEIGHT |
0.890 INCHES NOMINAL |
| AFJQ |
III STORAGE TEMP RANGE |
-62.0 TO 125.0 DEG CELSIUS |
| AQZF |
CONTROL TYPE |
LOCAL |
| AMQY |
INSTALLATION DESIGN |
MODULE |
| BJBW |
CONNECTION CONTACT TYPE AND QUANTITY |
4 CONNECTOR, PLUG EXTERNAL |
| BHTR |
PULSE DECAY TIME PER CHANNEL |
100.000 NANOSECONDS NOMINAL 1ST INPUT CHANNEL 100.000 NANOSECONDS NOMINAL 2ND INPUT CHANNEL |
| ADZC |
ENVIRONMENTAL PROTECTION |
SALT SPRAY RESISTANT AND VIBRATION |
| ABMK |
OVERALL WIDTH |
1.950 INCHES NOMINAL |
| BHSX |
CIRCUIT CONSTRUCTION TYPE |
SOLID STATE |
| AFSU |
AVERAGE LIFE MEASUREMENT |
HOURS |
| ABHP |
OVERALL LENGTH |
5.620 INCHES NOMINAL |
| AFGA |
OPERATING TEMP RANGE |
-55.0 TO 100.0 DEG CELSIUS |
| BHTZ |
SIGNAL DATA TYPE PER CHANNEL |
1ST INPUT CHANNEL PULSE 2ND INPUT CHANNEL PULSE OUTPUT CHANNEL DIGITAL |
| BKFB |
EXTERNAL DC OPERATING VOLTAGE IN VOLTS |
12.0 NOMINAL 1ST VOLTAGE -12.0 NOMINAL 2ND VOLTAGE |
| ALBM |
OPERATING CONTROL METHOD |
AUTOMATIC |
| FEAT |
SPECIAL FEATURES |
KEY CODE GAL |
| BHTW |
PULSE PEAK AMPLITUDE PER CHANNEL |
1.000 VOLTS 1ST INPUT CHANNEL 1.000 VOLTS 2ND INPUT CHANNEL |
| MARK |
III SPECIAL MARKINGS |
FILTER + CONVERTER MODULE |
| BHTP |
PULSE DURATION PER CHANNEL |
10.000 MILLISECONDS NOMINAL 1ST INPUT CHANNEL 10.000 MILLISECONDS NOMINAL 2ND INPUT CHANNEL |
| BJBP |
CONNECTION TYPE AND LOCATION |
CONNECTOR, PLUG BOTTOM |
| BHTT |
PULSE REPETITION RATE PER CHANNEL |
20.000 MEGAPULSES PER SECOND NOMINAL 1ST INPUT CHANNEL 20.000 MEGAPULSES PER SECOND NOMINAL 2ND INPUT CHANNEL |
| BHTQ |
PULSE RISE TIME PER CHANNEL |
100.000 NANOSECONDS NOMINAL 1ST INPUT CHANNEL 100.000 NANOSECONDS NOMINAL 2ND INPUT CHANNEL |
| BHTS |
POLARITY PER CHANNEL |
POSITIVE 1ST INPUT CHANNEL POSITIVE 2ND INPUT CHANNEL |
| TEST |
TEST DATA DOCUMENT |
10001-2833440 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
