| MRC |
Requirement Statement |
Characteristics |
| CRBZ |
WINDING OPERATING CURRENT |
529.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| ACZC |
INPUT-OUTPUT PHASE RELATIONSHIP |
SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| CRMJ |
WINDING POWER RATING |
13.8 VOLTS-AMPERES SINGLE COMPONENT SINGLE SECONDARY |
| FEAT |
SPECIAL FEATURES |
SECONDARY TERMINALS SPLIT AND BROUGHT OUT TO TWO TERMINALS EACH |
| ABHP |
OVERALL LENGTH |
3.480 INCHES MINIMUM AND 3.520 INCHES MAXIMUM |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.920 INCHES MINIMUM AND 0.940 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| AKPV |
MOUNTING FACILITY QUANTITY |
4 SINGLE GROUP |
| ABTB |
MOUNTING HOLE DIAMETER |
0.143 INCHES MINIMUM AND 0.149 INCHES MAXIMUM SINGLE GROUP |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| BPLC |
WINDING FUNCTION AND QUANTITY |
1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| AKNA |
INCLOSURE TYPE |
FULLY INCLOSED |
| ACZX |
WINDING SHIELDING METHOD |
INTERNAL SHIELD BROUGHT OUT TO TERMINAL SINGLE COMPONENT |
| AEHZ |
III MAXIMUM OPERATING TEMP |
130.0 DEG CELSIUS |
| ADAT |
BODY WIDTH |
1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
1.050 INCHES MINIMUM AND 1.090 INCHES MAXIMUM |
| PKWT |
(NON-CORE DATA) UNPACKAGED UNIT WEIGHT |
350.0 GRAMS |
| TTQY |
TERMINAL TYPE AND QUANTITY |
7 TURRET |
| CWJS |
WINDING OPERATING VOLTAGE |
115.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY 26.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| ACZB |
FREQUENCY RATING |
380.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM SINGLE COMPONENT |
| AXGY |
MOUNTING METHOD |
UNTHREADED HOLE SINGLE GROUP |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.170 INCHES MINIMUM AND 3.190 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| TEST |
TEST DATA DOCUMENT |
06481-905867 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
