| MRC |
Requirement Statement |
Characteristics |
| CBME |
III CUBIC MEASURE |
2.273 CUBIC INCHES |
| ABMK |
OVERALL WIDTH |
1.025 INCHES MAXIMUM |
| APNQ |
ARC QUENCHING METHOD |
AIR |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
200.0 AC AND 28.0 DC |
| CRPQ |
NOMINAL OPERATING CURRENT RATING AND TYPE |
150.0 MILLIAMPERES DC SINGLE WINDING |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
10.0 AMPERES AC AND 10.0 AMPERES DC RESISTIVE LOAD 8.0 AMPERES AC AND 8.0 AMPERES DC INDUCTIVE LOAD 2.0 AMPERES AC AND 2.0 AMPERES DC LAMP LOAD 4.0 AMPERES AC AND 4.0 AMPERES DC MOTOR LOAD |
| ADZC |
ENVIRONMENTAL PROTECTION |
HERMETIC |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-R-83726/28 GOVERNMENT SPECIFICATION |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 WIRE HOOK ALL FUNCTIONS |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
30.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
3 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| CSQJ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE |
1.396 INCHES MINIMUM AND 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABKW |
OVERALL HEIGHT |
1.320 INCHES MAXIMUM |
| ADTV |
III CASE MATERIAL |
METAL |
| CQYJ |
MOUNTING FACILITY PATTERN |
TRIANGLE SINGLE MOUNTING FACILITY |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AKSL |
III PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| CRXH |
TIME DELAY |
180.00 SECONDS MAXIMUM FIXED OPERATE TIME |
| AKDX |
WINDING QUANTITY |
1 |
| CBBL |
FEATURES PROVIDED |
POLARIZED |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| APCN |
COIL QUANTITY |
1 |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M83726/28-1803P |
| ABHP |
OVERALL LENGTH |
1.718 INCHES MAXIMUM |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
0.625 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-PRF-83726/28 |
| ABTD |
MOUNTING SLOT WIDTH |
0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| AGAV |
III END ITEM IDENTIFICATION |
LGM30 TEST SE |
| APNP |
DUTY TYPE |
CONTINUOUS |
