| MRC |
Requirement Statement |
Characteristics |
| CBME |
III CUBIC MEASURE |
10.289 CUBIC INCHES |
| ADZC |
ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| AAJD |
THREAD CLASS |
2B SINGLE MOUNTING FACILITY |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE SINGLE MOUNTING FACILITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
8 QUICK DISCONNECT, MALE ALL FUNCTIONS |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
1.829 INCHES MINIMUM AND 1.859 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNC SINGLE MOUNTING FACILITY |
| ABKW |
OVERALL HEIGHT |
1.950 INCHES MAXIMUM |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
250.0 AC |
| ABMK |
OVERALL WIDTH |
1.730 INCHES MAXIMUM |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
120.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING |
| CQYJ |
MOUNTING FACILITY PATTERN |
IN-LINE SINGLE MOUNTING FACILITY |
| ABHP |
OVERALL LENGTH |
3.050 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES SINGLE MOUNTING FACILITY |
| AKSL |
III PURPOSE FOR WHICH DESIGNED |
GENERAL |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| SR-5 |
DESIGN CONTROL REFERENCE |
H6-184759P1 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND SINGLE MOUNTING FACILITY |
| CRPQ |
NOMINAL OPERATING CURRENT RATING AND TYPE |
75.0 MILLIAMPERES AC ALL WINDINGS |
| AGAV |
III END ITEM IDENTIFICATION |
6525-01-159-3009 FIELD RADIOGRAPHIC/FLUOROSCOPIC X-RAY SYSTEM; MODEL DXD 350 II |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
15.0 AMPERES AC RESISTIVE LOAD |
| APCN |
COIL QUANTITY |
1 |
| ADTV |
III CASE MATERIAL |
PLASTIC |
| SR-5 |
MANUFACTURERS CODE |
24456 |
| AFRG |
III CONTACT MATERIAL |
TUNGSTEN |
| CWJB |
ENERGIZING ELEMENT POWER RATING |
9.0 VOLTS-AMPERES |
| APNP |
DUTY TYPE |
CONTINUOUS |
| AJSS |
FREQUENCY IN HERTZ |
50.0 MINIMUM AND 60.0 MAXIMUM |
| APNA |
WINDING DC RESISTANCE RATING |
260.0 OHMS NOMINAL SINGLE WINDING |
