| MRC |
Requirement Statement |
Characteristics |
| CQYJ |
MOUNTING FACILITY PATTERN |
IN-LINE FIRST MOUNTING FACILITY IN-LINE SECOND MOUNTING FACILITY |
| CSKP |
NONPILE-UP AUXILIARY CONTACT ARRANGEMENT |
3 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION AND 1 POLE, SINGLE THROW, NORMALLY CLOSED, MOMENTARY ACTION |
| CSQC |
AUXILIARY CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
220.0 AC |
| CSXF |
OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP |
24.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| ABKR |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
2.000 INCHES NOMINAL SECOND MOUNTING FACILITY |
| ADZC |
ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| CWAB |
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS |
600.0 AC |
| CTDL |
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
25.0 AMPERES AC RESISTIVE LOAD |
| ABKW |
OVERALL HEIGHT |
3.437 INCHES NOMINAL |
| CRNG |
NONPILE-UP MAIN CONTACT ARRANGEMENT |
3 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| APNA |
WINDING DC RESISTANCE RATING |
175.0 OHMS NOMINAL SINGLE WINDING |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.173 INCHES NOMINAL SECOND MOUNTING FACILITY |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 SLOTTED HOLE FIRST MOUNTING FACILITY 2 UNTHREADED HOLE SECOND MOUNTING FACILITY |
| TTQY |
TERMINAL TYPE AND QUANTITY |
16 SCREW ALL FUNCTIONS |
| AKDX |
WINDING QUANTITY |
1 |
| CWGM |
AUXILIARY CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE |
10.0 AMPERES AC RESISTIVE LOAD |
| ABHP |
OVERALL LENGTH |
3.750 INCHES NOMINAL |
| APCN |
COIL QUANTITY |
1 |
| ABKQ |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
3.250 INCHES NOMINAL FIRST MOUNTING FACILITY |
| ADTV |
III CASE MATERIAL |
PLASTIC |
| ABTD |
MOUNTING SLOT WIDTH |
0.203 INCHES NOMINAL FIRST MOUNTING FACILITY |
| ABMK |
OVERALL WIDTH |
3.750 INCHES NOMINAL |
| APNP |
DUTY TYPE |
CONTINUOUS |
