| MRC |
Requirement Statement |
Characteristics |
| CXCG |
INCLUDED CONTACT QUANTITY |
14 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG |
INSERT MATERIAL |
PLASTIC DIALLYL PHTHALATE AND GLASS FIBER OR PLASTIC POLYESTER SINGLE MATING END |
| AFRV |
CONNECTOR LOCKING METHOD |
FRICTION |
| CWKD |
(NON-CORE DATA) ROUND GUIDE TYPE AND LOCATION |
SOCKET LEFT-HAND BOTTOM AND PIN RIGHT-HAND TOP |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN |
POLARIZATION METHOD |
GUIDE PIN/SOCKET |
| AFQW |
MATING END QUANTITY |
1 |
| ADZC |
ENVIRONMENTAL PROTECTION |
SHOCK RESISTANT AND VIBRATION RESISTANT AND CORROSION RESISTANT AND HUMIDITY RESISTANT AND FUNGUS RESISTANT |
| AFRC |
CONTACT MAXIMUM CURRENT RATING IN AMPS |
5.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTM |
TERMINAL LOCATION |
SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT |
III PRECIOUS MATERIAL |
GOLD |
| CTKL |
INSERT MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-M-14,TY SDG-F OR TY GDI-30F MIL SPEC 1ST MATERIAL RESPONSE AND MIL-M-14,TY SDG-F OR TY GDI-30F MIL SPEC 2ND MATERIAL RESPONSE OR MIL-M-24519,TY GPT-30F OR GST-40F MIL SPEC 3RD MATERIAL RESPONSE SINGLE MATING END |
| ABMK |
OVERALL WIDTH |
0.540 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| CSCF |
TERMINAL TYPE |
PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| PMWT |
III PRECIOUS MATERIAL AND WEIGHT |
0.014 GOLD GRAINS, TROY |
| ADAU |
BODY HEIGHT |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW |
OVERALL HEIGHT |
0.550 INCHES NOMINAL |
| CRBJ |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-G-45204,TY II,GRADE C,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CL 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| AFQZ |
CONTACT REMOVABILITY |
NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| AAQL |
BODY STYLE |
RIGHT ANGLE, CARD |
| CSGF |
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
1.045 INCHES MINIMUM AND 1.055 INCHES MAXIMUM |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD |
