| MRC |
Requirement Statement |
Characteristics |
| TTQY |
TERMINAL TYPE AND QUANTITY |
6 SCREW |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AAQL |
BODY STYLE |
MULTIPOLE-SINGLE ACTUATOR TYPE |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
MOISTURE RESISTANT AND SALT SPRAY PROOF AND SHOCK RESISTANT AND VIBRATION RESISTANT |
| ABXD |
BUSHING LENGTH |
0.480 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES |
| APNQ |
III ARC QUENCHING METHOD |
MAGNETIC BLOWOUT |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE TWO |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
250.0 AC ALL LOCATIONS |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY ALL LOCATIONS |
| CPRQ |
RESET METHOD |
MANUAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
1 THREADED BUSHING W/PANEL SEAL |
| AEFQ |
III NONTURN DEVICE LENGTH |
0.115 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
150.0 ALL LOCATIONS |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.515 INCHES MINIMUM AND 1.545 INCHES MAXIMUM |
| BBRJ |
III SPECIAL HANDLING FEATURE |
MAGNETIC |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC-HYDRAULIC ALL LOCATIONS |
| AFJN |
III FRAGILITY FACTOR |
MODERATELY RUGGED |
| FREQ |
FREQUENCY IN HERTZ |
400.0 ALL LOCATIONS |
| PKWT |
III UNPACKAGED UNIT WEIGHT |
9.000 OUNCES |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
2100.0 AC ALL LOCATIONS |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| ADAT |
BODY WIDTH |
2.265 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.232 INCHES MAXIMUM |
| BBRG |
III STORAGE TYPE |
GENERAL PURPOSE WAREHOUSE |
| THSD |
THREAD SERIES DESIGNATOR |
UN |
| AEFP |
III NONTURN DEVICE RADIUS |
0.641 INCHES MINIMUM AND 0.671 INCHES MAXIMUM |
| AKPX |
POLE QUANTITY |
3 |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP ALL LOCATIONS |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT ALL LOCATIONS |
| ADAQ |
BODY LENGTH |
1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
35.0 AMPERES AC ALL LOCATIONS |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
2.000 MINIMUM AT 200 PCT AND 22.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| AEFS |
III NONTURN DEVICE DIAMETER |
0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
