| MRC |
Requirement Statement |
Characteristics |
| CPSM |
INTERNAL TRIP RELEASE CONFIGURATION |
SERIES TRIP SINGLE LOCATION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED HOLE |
| CPRH |
CIRCUIT PROTECTION TYPE |
OVERCURRENT SINGLE LOCATION |
| CPRL |
TRIP RELEASE CHARACTERISTIC |
TIME DELAY SINGLE LOCATION |
| ADAQ |
BODY LENGTH |
2.510 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-PRF-55629/1 |
| AJWX |
MOUNTING SURFACE TO TERMINAL END DISTANCE |
2.553 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
M55629/1-115 |
| CPRW |
ACTUATOR FUNCTION |
TRIP-RESET |
| CPRT |
MANUAL ACTUATOR TYPE AND QUANTITY |
1 TOGGLE |
| CPRJ |
TRIP RELEASE METHOD |
MAGNETIC SINGLE LOCATION |
| CPRN |
ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT |
125.0 SINGLE LOCATION |
| AJEC |
BOSS HEIGHT |
0.140 INCHES NOMINAL |
| CQXF |
INCLOSURE PROTECTION TYPE FOR WHICH DESIGNED |
FUNGUS RESISTANT |
| CPRQ |
RESET METHOD |
MANUAL |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.062 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 THREADED STUD |
| FREQ |
FREQUENCY IN HERTZ |
60.0 SINGLE LOCATION |
| CPLM |
MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE |
30.0 AMPERES AC SINGLE LOCATION |
| AAQL |
BODY STYLE |
SINGLE POLE TYPE |
| ADAT |
BODY WIDTH |
0.755 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CPRG |
MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS |
1000.0 AC SINGLE LOCATION |
| ADTV |
CASE MATERIAL |
PLASTIC |
| CPRR |
MAIN CONTACT TRIPPING MECHANISM TYPE |
TRIP FREE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| CPRF |
OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS |
240.0 AC SINGLE LOCATION |
| AKPX |
POLE QUANTITY |
1 |
| CQWN |
TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT |
3.000 MINIMUM AT 200 PCT AND 9.450 MAXIMUM AT 200 PCT SINGLE LOCATION |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.810 INCHES NOMINAL |
| AAJE |
THREAD PITCH DIAMETERS |
0.1177 TO 0.1214 INCHES |
| CPRX |
ACTUATOR POSITION DESIGNATION |
AT POLE ONE |
