| MRC |
Requirement Statement |
Characteristics |
| ABHP |
OVERALL LENGTH |
2.250 INCHES NOMINAL |
| CQDR |
INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS |
1.0 BLANK |
| AHAV |
OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT |
10.0 KILOHMS BLANK |
| CQRG |
III BODY MATERIAL |
METAL |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
1.250 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| CRBC |
III DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS |
1.0 MAXIMUM BLANK AND 1.0 MAXIMUM BLANK AND 60.0 MINIMUM BLANK AND 60.0 MINIMUM BLANK |
| FEAT |
SPECIAL FEATURES |
TERMINALS ON ONE SURFACE |
| AHAU |
INPUT IMPEDANCE PER FUNCTION W/LOAD |
1.0 KILOHMS BLANK |
| CRBB |
FREQUENCY BAND WIDTH PER FUNCTION |
2.00 KILOHERTZ BLANK AND 4.20 KILOHERTZ BLANK |
| CQFC |
III SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION |
2.00 KILOHERTZ BLANK AND 4.20 KILOHERTZ BLANK AND 14.00 KILOHERTZ BLANK AND 28.00 KILOHERTZ BLANK |
| ADAU |
BODY HEIGHT |
2.250 INCHES NOMINAL |
| AKNA |
INCLOSURE TYPE |
HERMETICALLY SEALED |
| AHAJ |
REFERENCE FREQUENCY PER FUNCTION |
3.1 KILOHERTZ BLANK |
| CRDC |
III MAXIMUM DIELECTRIC WITHSTANDING DC VOLTAGE |
1.0 KILOVOLTS AT SEA LEVEL |
| CQDW |
FUNCTIONAL TERMINAL TYPE AND QUANTITY |
1 TAB, SOLDER LUG INPUT 1ST FUNCTION 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION 1 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| ABKW |
OVERALL HEIGHT |
2.500 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
1.250 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| AFGA |
III OPERATING TEMP RANGE |
0.0 TO 75.0 DEG CELSIUS |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.875 INCHES NOMINAL |
