| MRC |
Requirement Statement |
Characteristics |
| CSDH |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER |
25.0 SINGLE SECTION |
| CBBL |
FEATURES PROVIDED |
NONMETALLIC SHAFT |
| CQCK |
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG |
3600.0 MINIMUM |
| AEFN |
NONTURN DEVICE LOCATION |
AT 6 OCLOCK |
| AEDZ |
SHAFT BEARING TYPE |
SLEEVE |
| ABWV |
SHAFT DIAMETER |
0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AJYN |
SCREW THREAD DIAMETER |
0.375 INCHES NOMINAL |
| AEFD |
ACTUATOR TYPE |
SINGLE SHAFT |
| ADAQ |
BODY LENGTH |
1.531 INCHES MINIMUM AND 1.594 INCHES MAXIMUM |
| CRGD |
POWER DISSIPATION RATING PER SECTION IN WATTS |
2.0 FREE AIR SINGLE SECTION |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| CSCY |
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS |
-20.0 TO 20.0 SINGLE SECTION |
| CQGN |
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER |
85.0 SINGLE SECTION |
| ADAU |
BODY HEIGHT |
0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM |
| ADAT |
BODY WIDTH |
0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| AEFP |
NONTURN DEVICE RADIUS |
0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| CQCC |
ELECTRICAL RESISTANCE PER SECTION |
100.0 OHMS SINGLE SECTION |
| AAQL |
BODY STYLE |
RECTANGULAR W/BUSHING |
| AEFK |
MAXIMUM STARTING TORQUE |
3.00 INCH-OUNCES |
| CRGM |
FUNCTION CONFORMITY PER SECTION |
SINGLE SECTION ABSOLUTE LINEARITY |
| AJYQ |
SCREW THREAD QUANTITY PER INCH |
32.0 |
| AEFL |
MAXIMUM RUNNING TORQUE |
3.00 INCH-OUNCES |
| CRSX |
ACTUATOR TRAVEL CONTROL FEATURE |
STOPS |
| CRSS |
RESISTANCE TOLERANCE PER SECTION IN PERCENT |
-5.0 TO 5.0 SINGLE SECTION |
| AEDX |
SHAFT STYLE |
ROUND, SLOTTED |
| APXH |
TERMINAL LOCATION |
REAR END |
| AEFH |
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION |
3600.0 NOMINAL |
| AXGY |
MOUNTING METHOD |
STANDARD BUSHING |
| TTQY |
TERMINAL TYPE AND QUANTITY |
3 TAB, SOLDER LUG |
| CQFL |
FUNCTION CONFORMITY TOLERANCE PER SECTION |
-0.50 TO 0.50 SINGLE SECTION |
| AJYP |
SCREW THREAD SERIES DESIGNATOR |
UNEF |
| AAPN |
SECTION QUANTITY |
1 |
| CSBX |
FUNCTION CHARACTERISTIC PER SECTION |
SINGLE SECTION LINEAR |
| AEFM |
MAXIMUM STOP TORQUE |
50.00 INCH-OUNCES |
| ADAP |
MOUNTING BUSHING LENGTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| ABXF |
SHAFT LENGTH |
0.906 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
