| MRC |
Requirement Statement |
Characteristics |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.783 INCHES MINIMUM AND 0.893 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| ADLL |
SECOND LEG LENGTH |
0.820 INCHES MINIMUM AND 0.830 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5504 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS9601-009 |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AJFQ |
SECOND LEG END RADIUS |
0.500 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
