| MRC |
Requirement Statement |
Characteristics |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.562 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.656 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1020 |
| AJFQ |
SECOND LEG END RADIUS |
1.125 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.688 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.121 INCHES MINIMUM AND 0.131 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.422 INCHES MINIMUM AND 0.429 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.281 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
1.312 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.438 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.093 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.121 INCHES MINIMUM AND 0.131 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
