| MRC |
Requirement Statement |
Characteristics |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| HEAT |
III HEAT TREATMENT |
T-3 SOLUTION HEAT TREATED |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLG |
SECOND LEG CORNER RADIUS |
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| ADLL |
SECOND LEG LENGTH |
1.170 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE ZINC |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AHPX |
SECOND LEG THICKNESS |
0.080 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.390 INCHES MINIMUM AND 0.397 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
206-070-804-001 |
| AHQN |
FIRST LEG WIDTH |
3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.080 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-6808 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| CSSQ |
FIRST LEG ANGLE |
120.5 DEGREES NOMINAL |
