| MRC |
Requirement Statement |
Characteristics |
| AASB |
FASTENER LENGTH |
2.728 INCHES MINIMUM AND 2.748 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.613 INCHES MINIMUM AND 2.643 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| AAUR |
GRIP DIAMETER |
0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAJD |
THREAD CLASS |
3A |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AATB |
WIDTH BETWEEN FLATS |
0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
DISHED HEXAGON |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| CQBC |
MINIMUM TENSILE STRENGTH |
95000 POUNDS PER SQUARE INCH |
| AAUM |
LOCKING FEATURE |
DETENT RING GRIP |
| AASU |
HEAD HEIGHT |
0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.311 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
| ANEE |
GRIP LENGTH |
2.250 INCHES MINIMUM AND 2.266 INCHES MAXIMUM |
