| MRC |
Requirement Statement |
Characteristics |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAJD |
THREAD CLASS |
2A |
| AHYM |
NOMINAL THREAD DIAMETER |
0.750 INCHES |
| AASU |
HEAD HEIGHT |
0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS51095-458 |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE OVERALL |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| AAUB |
HOLE DIAMETER |
0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| CQBC |
MINIMUM TENSILE STRENGTH |
120000 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| AATB |
WIDTH BETWEEN FLATS |
1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AASB |
FASTENER LENGTH |
1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.938 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| CMLP |
THREAD QUANTITY PER INCH |
10 |
