| MRC |
Requirement Statement |
Characteristics |
| AASU |
HEAD HEIGHT |
0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAJD |
THREAD CLASS |
2A |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| CBBL |
FEATURES PROVIDED |
FINISHED HEAD |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.312 INCHES |
| AAUB |
HOLE DIAMETER |
0.062 INCHES NOMINAL |
| ASXK |
HOLE QUANTITY |
1 |
| AATB |
WIDTH BETWEEN FLATS |
0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
1.077 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS18154-35L |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SFTT |
SURFACE TREATMENT |
ZINC AND CHROMATE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1524 OR STEEL COMP 1527 OR STEEL COMP 1536 OR STEEL COMP 1541 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AASB |
FASTENER LENGTH |
1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| BQDM |
HOLE TYPE |
DRILLED |
