| MRC |
Requirement Statement |
Characteristics |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAJD |
THREAD CLASS |
2A |
| AATB |
WIDTH BETWEEN FLATS |
0.9220 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AASA |
THREAD LENGTH |
1.727 INCHES MINIMUM |
| AAUB |
HOLE DIAMETER |
0.092 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| ASXK |
HOLE QUANTITY |
1 |
| CMLP |
THREAD QUANTITY PER INCH |
11 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AHYM |
NOMINAL THREAD DIAMETER |
0.625 INCHES |
| SFTT |
SURFACE TREATMENT |
ZINC AND CHROMATE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| AASU |
HEAD HEIGHT |
0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| BQDM |
HOLE TYPE |
DRILLED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 8 GRADE |
