| MRC |
Requirement Statement |
Characteristics |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| AAJD |
THREAD CLASS |
2A |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AASA |
THREAD LENGTH |
4.381 INCHES MINIMUM AND 4.500 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.375 INCHES |
| AATB |
WIDTH BETWEEN FLATS |
0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| ASXK |
HOLE QUANTITY |
1 |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| SFTT |
SURFACE TREATMENT |
ZINC AND CHROMATE OVERALL |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| AASB |
FASTENER LENGTH |
4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS18154-74 |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| MATT |
MATERIAL |
STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| AAUB |
HOLE DIAMETER |
0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
150000 POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE AND 8 GRADE |
