| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
CROSS RECESS TYPE 1 |
| AAJD |
THREAD CLASS |
2A |
| AAWC |
FIRST DIAMETER FROM HEAD |
0.114 INCHES MINIMUM AND 0.124 INCHES MAXIMUM |
| AHYM |
NOMINAL THREAD DIAMETER |
0.164 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS51896-14 |
| AAWH |
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER |
0.432 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| MATT |
MATERIAL |
STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-92 |
| AASU |
HEAD HEIGHT |
0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| CSNG |
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY |
1 |
| AASL |
HEAD DIAMETER |
0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE AND 9C STYLE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| AASA |
THREAD LENGTH |
0.267 INCHES MINIMUM AND 0.287 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN |
