| MRC |
Requirement Statement |
Characteristics |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES THREADS |
| CRHC |
HOLE CONFIGURATION STYLE |
HEXAGON FLATS |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| MATT |
MATERIAL |
STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303F OR STEEL COMP 385 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 323 OR STEEL COMP 324 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL |
| CQFM |
HARDNESS RATING |
80.0 ROCKWELL B MINIMUM OVERALL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 TYPE AND 10P STYLE |
| CMLP |
THREAD QUANTITY PER INCH |
13 |
| AASA |
THREAD LENGTH |
1.250 INCHES MINIMUM AND 1.604 INCHES MAXIMUM |
| CQHQ |
MINIMUM YIELD STRENGTH |
30000 POUNDS PER SQUARE INCH |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
FF-S-85 |
| CQBC |
MINIMUM TENSILE STRENGTH |
80000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| AAUB |
HOLE DIAMETER |
0.070 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AASU |
HEAD HEIGHT |
0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AATB |
WIDTH BETWEEN FLATS |
0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
81348 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AASK |
HEAD STYLE |
HEXAGON |
| ASXK |
HOLE QUANTITY |
3 |
| AHYM |
NOMINAL THREAD DIAMETER |
0.500 INCHES |
| AASB |
FASTENER LENGTH |
1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM |
| BQDM |
HOLE TYPE |
DRILLED |
