| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 1741AS360-301 | NAVAL AIR SYSTEMS COMMAND | 30003 | C | 1 | 1 | N | |||
| 301810 | BOSCH REXROTH GMBH LOHMANN | D9182 | C | 1 | 1 | N | |||
| 35A2D384 | CLARK EQUIPMENT COMPANY | 33968 | C | 1 | 1 | F | |||
| 5-13-2513P13 | US ARMY NATICK SOLDIER CENTER | 81337 | 5 | 9 | 1 | ||||
| 70009-193 | LITTLE GIANT CRANE AND SHOVEL INC | 95097 | 5 | 9 | 1 | ||||
| AF32T2000A18-8 | KAYDON RING & SEAL INC. | 75370 | 5 | 9 | 1 | ||||
| FF-S-85 | FEDERAL SPECIFICATIONS | 81348 | 4 | 1 | 1 | ||||
| MS35297-193 | MILITARY STANDARDS | 96906 | C | 1 | 1 | D | |||
| MS90725-193 | NATIONAL AEROSPACE STANDARDS | 80205 | 3 | 2 | 1 | ||||
| MS90725-193 | MILITARY STANDARDS | 96906 | 5 | 9 | 1 | ||||
| TU144036-5 | EATON INDUSTRIAL CORPORATION | 59875 | 5 | 9 | 1 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| AASA | THREAD LENGTH | 1.732 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| CQFM | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FF-S-85 |
| AASB | FASTENER LENGTH | 3.406 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SR-1 | MANUFACTURERS CODE | 81348 |
| CQBC | MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | HEXAGON |
| AATB | WIDTH BETWEEN FLATS | 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 10 |
