| MRC |
Requirement Statement |
Characteristics |
| ADST |
BONNET ATTACHMENT METHOD |
BOLTED |
| AWLS |
CONNECTION TYPE |
FLANGE 1ST END |
| CWCT |
BOLT CIRCLE NOMINAL DIAMETER |
11.062 INCHES 1ST END |
| STYL |
STYLE DESIGNATOR |
A7A ANGLE FLANGED ENDS |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
12.375 INCHES 1ST END |
| CBBL |
FEATURES PROVIDED |
BONNET PACKING |
| AQLR |
VALVE OPERATION METHOD |
MANUAL |
| ADQU |
FLOW CONTROL DEVICE |
DISK |
| CWCR |
SECOND CONNECTION FACE TO CENTERLINE DISTANCE |
9.750 INCHES |
| CQGM |
MAXIMUM OPERATING PRESSURE |
100.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER-OIL-GAS SINGLE RESPONSE |
| AEHZ |
MAXIMUM OPERATING TEMP |
425.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADZH |
RENEWABLE SEAT RING TYPE |
THREADED |
| CWCQ |
BOLT HOLE NOMINAL DIAMETER |
0.688 INCHES 1ST END |
| TEST |
TEST DATA DOCUMENT |
80064-5000S4824-1385541 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AECS |
BOLT HOLE QUANTITY |
14 1ST END |
| CWCL |
FIRST CONNECTION FACE TO CENTERLINE DISTANCE |
9.750 INCHES |
| CWDF |
FLANGE FACE DESIGN |
PLAIN 1ST END |
| CCFG |
VALVE SIZE |
8.000 INCHES |
| CWCK |
NOMINAL THICKNESS |
0.675 INCHES 1ST END |
| ARKN |
FLANGE SHAPE |
ROUND WITH HOLES 1ST END |
| MATT |
MATERIAL |
COPPER ALLOY 922 BODY NICKEL ALLOY FLOW CONTROL DEVICE NICKEL ALLOY SEAT NICKEL ALLOY STEM |
| ADSR |
BONNET TYPE |
OUTSIDE SCREW-YOKE |
