| MRC |
Requirement Statement |
Characteristics |
| AAXC |
CONCENTRIC HOLE DIAMETER |
0.215 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| BBLB |
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT |
1.930 INCHES NOMINAL |
| CRMX |
SECOND END THREAD QUANTITY PER INCH |
28 |
| BBKY |
FIRST RADIAL FLUID HOLE DIAMETER |
0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| AASY |
DISTANCE FROM CENTERLINE TO FLAT |
0.615 INCHES NOMINAL |
| ATLF |
SECOND END THREAD LENGTH |
0.250 INCHES NOMINAL |
| BBKS |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER |
2.535 INCHES NOMINAL |
| ACMS |
SECOND END THREAD DIRECTION |
RIGHT-HAND |
| BBKL |
FIRST DIAMETER FROM WRENCHING FEATURE |
0.999 INCHES NOMINAL |
| BBLF |
WRENCHING FEATURE HEIGHT |
0.210 INCHES NOMINAL |
| AGAV |
III END ITEM IDENTIFICATION |
C-5 GALAXY; B-52 STRATOFORTRESS |
| ADDV |
COTTER PIN HOLE DIAMETER |
0.139 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| CRPF |
SECOND END THREAD SERIES DESIGNATOR |
UNF |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000,COND C4 MIL SPEC SINGLE MATERIAL RESPONSE |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| FEAT |
SPECIAL FEATURES |
WEAPON SYTEM ESENTIAL |
| BBKK |
DISTANCE FROM BOLT END TO HOLE CENTER |
0.168 INCHES NOMINAL |
| CQBC |
MINIMUM TENSILE STRENGTH |
20000 POUNDS PER SQUARE INCH |
| BBLD |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END |
3.202 INCHES NOMINAL |
| AAWX |
CONCENTRIC HOLE DEPTH |
2.430 INCHES NOMINAL |
| BBKR |
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER |
2.460 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
3.412 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AASL |
HEAD DIAMETER |
1.500 INCHES NOMINAL |
| CRNB |
SECOND END NOMINAL THREAD SIZE |
0.250 INCHES |
| ACMR |
SECOND END THREAD CLASS |
3B |
| AAQL |
BODY STYLE |
SHOULDER |
| BBDF |
WRENCHING FEATURE STYLE |
ROUND WITH WRENCH FLATS |
