| MRC |
Requirement Statement |
Characteristics |
| CQBD |
BURST TEST PRESSURE |
750.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END PUSH (INTERNAL) 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 165.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
0.500 INCHES 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
6.000 INCHES |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END INTERNAL QUICK DISCONNECT 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND COLD RESISTANT AND HYDRAULIC SOLUTION RESISTANT |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| ABKV |
OUTSIDE DIAMETER |
0.781 INCHES NOMINAL |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CHROMIUM |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
16.750 INCHES NOMINAL OVERALL |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| MEDA |
MEDIA FOR WHICH DESIGNED |
AIR AND HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
