| MRC |
Requirement Statement |
Characteristics |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END 37.0 DEGREES 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, FED STD 66, AISI 321/SAE 30321 |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END ELBOW 2ND END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
130.0 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END SWIVEL NUT FLARE 2ND END |
| SR-5 |
DESIGN CONTROL REFERENCE |
184032-1020 |
| SR-5 |
MANUFACTURERS CODE |
70510 |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| SR-5 |
THE MANUFACTURERS DATA |
|
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
STEEL, FED STD 66, AISI 321/SAE 30321 |
| AARX |
INSIDE DIAMETER |
0.250 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END UNF 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.500 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END 90.0 DEGREES 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END 0.438 INCHES 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
29.500 INCHES NOMINAL OVERALL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CRLL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.750 INCHES |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, FED STD 66, AISI 321/SAE 30321 |
