| MRC |
Requirement Statement |
Characteristics |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRXX |
MEASURING METHOD AND LENGTH |
10.875 INCHES MINIMUM OVERALL AND 11.125 INCHES MAXIMUM OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
24 1ST END 24 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AAJD |
THREAD CLASS |
2A 1ST END 1A 2ND END |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
FUEL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| AARX |
INSIDE DIAMETER |
0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| CQRB |
SEAT ANGLE |
42.0 DEGREES 1ST END 45.0 DEGREES 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING COPPER ALLOY OR COMPLETE FITTING STEEL |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING COPPER ALLOY OR COMPLETE FITTING STEEL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 1ST END THREADED EXTERNAL TUBE 2ND END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END SWIVEL NUT, INVERTED FLARE 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
425.0 POUNDS PER SQUARE INCH |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 TYPE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END UN 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
850.0 POUNDS PER SQUARE INCH |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| CQBD |
BURST TEST PRESSURE |
1700.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END 0.438 INCHES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MIL-H-13444 |
| ABKV |
OUTSIDE DIAMETER |
0.406 INCHES MINIMUM AND 0.468 INCHES MAXIMUM |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13444 GOVERNMENT SPECIFICATION |
