| MRC |
Requirement Statement |
Characteristics |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
16.875 INCHES MINIMUM WORKING AND 17.125 INCHES MAXIMUM WORKING |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQBD |
BURST TEST PRESSURE |
7200.0 POUNDS PER SQUARE INCH |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| ABKV |
OUTSIDE DIAMETER |
0.786 INCHES NOMINAL |
| CQHW |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
STEEL, FED STD 66, AISI 321/SAE 30321 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| CRDW |
HYDROSTATIC TEST PRESSURE |
3600.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1800.0 POUNDS PER SQUARE INCH |
| CBBL |
FEATURES PROVIDED |
IDENTICAL ENDS |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
FERRULE STEEL, FED STD 66, AISI 321/SAE 30321 NUT STEEL, FED STD 66, AISI 304/SAE 30304 SLEEVE STEEL, FED STD 66, AISI 304/SAE 30304 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| ABJH |
TEMP RATING |
800.0 DEG FAHRENHEIT SINGLE RESPONSE |
