| MRC |
Requirement Statement |
Characteristics |
| THSD |
THREAD SERIES DESIGNATOR |
UNJS 1ST END UNJS 2ND END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CRXX |
MEASURING METHOD AND LENGTH |
14.000 INCHES NOMINAL WORKING |
| ABKV |
OUTSIDE DIAMETER |
0.507 INCHES MAXIMUM |
| CQQN |
(NON-CORE DATA) EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL CHAFE GUARD, POLYTETRAFLUOROETHYLENE TUBING |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END THREADED INTERNAL TUBE 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.000 INCHES |
| CRZY |
(NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END 0.438 INCHES 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END 3B 2ND END |
| CQBD |
BURST TEST PRESSURE |
16000.0 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
20 1ST END 24 2ND END |
| CRBL |
(NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL |
SOCKET STEEL, CORROSION RESISTING NUT,TITANIUM ALLOY TYPE 6AL-4V |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| ADJM |
(NON-CORE DATA) INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQRB |
SEAT ANGLE |
8.5 DEGREES 1ST END 8.5 DEGREES 2ND END |
| CQGH |
(NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL |
SOCKET STEEL, CORROSION RESISTING NUT,TITANIM ALLOY TYPE 6AL-4V |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END STRAIGHT 2ND END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.212 INCHES MINIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END RIGHT-HAND 2ND END |
| CQBG |
(NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBB |
(NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJP |
(NON-CORE DATA) OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, INVERTED FLARE 1ST END SWIVEL NUT, INVERTED FLARE 2ND END |
