| MRC |
Requirement Statement |
Characteristics |
| AEPR |
FLANGE OUTSIDE DIAMETER |
0.4270 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4140 OR STEEL COMP 4130 OVERALL |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0400 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
0.1871 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| AGFF |
FLANGE WIDTH |
0.1780 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 63.0 MICROINCHES RIGHT END SURFACE OF BODY 63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
DESIGN CONTROL REFERENCE |
47-267-141-1 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626,COND C4 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758,C4 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| STYL |
STYLE DESIGNATOR |
SOLID |
| BZLX |
CORNER SHAPE |
CHAMFERED OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER SQUARE INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER |
| SR-5 |
MANUFACTURERS CODE |
97499 |
| ABHP |
OVERALL LENGTH |
0.3480 INCHES MINIMUM AND 0.3580 INCHES MAXIMUM |
| ADAR |
BODY OUTSIDE DIAMETER |
0.3135 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
45.0 DEGREES NOMINAL |
