| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY AND FLANGE |
| ADAS |
BODY INSIDE DIAMETER |
0.6880 INCHES MINIMUM AND 0.6890 INCHES MAXIMUM |
| ADAR |
BODY OUTSIDE DIAMETER |
0.8135 INCHES MINIMUM AND 0.8140 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
Q-A-200/11 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC 2ND MATERIAL RESPONSE OUTER LAYER |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.0600 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
0.3080 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
2578730-001A |
| SR-5 |
THE MANUFACTURERS DATA |
|
| MATT |
MATERIAL |
PLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER ALUMINUM ALLOY 7075 OUTER LAYER |
| STYL |
STYLE DESIGNATOR |
SOLID |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY 125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE 125.0 MICROINCHES RIGHT END SURFACE OF BODY 125.0 MICROINCHES RIGHT END SURFACE OF BODY AND FLANGE |
| AGFF |
FLANGE WIDTH |
0.0480 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM |
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER SQUARE LEFT FLANGE BODY CORNER |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0400 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
10.0 DEGREES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
13002 |
| SFTT |
SURFACE TREATMENT |
ANODIZE LEFT END SURFACE OF BODY AND FLANGE ANODIZE OUTSIDE DIAMETER SURFACE OF BODY ANODIZE OUTSIDE DIAMETER SURFACE OF FLANGE ANODIZE RIGHT END SURFACE OF BODY ANODIZE RIGHT END SURFACE OF BODY AND FLANGE |
