| MRC |
Requirement Statement |
Characteristics |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
CPT 8204,13002 MFR REF 1ST TREATMENT RESPONSE OR CPT 8205,13002 MFR REF 2ND TREATMENT RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES INTERMEDIATE LAYER |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL |
| AGFF |
FLANGE WIDTH |
0.2300 INCHES MINIMUM AND 0.2400 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
COUNTERBORE,1.7600 IN. MIN,1.7700 IN.MAX,DIA,0.0600 IN. MIN,0.0700 IN. MAX,DEEP,LOCATED ON FLANGE FACE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| BZLX |
CORNER SHAPE |
SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER CHAMFERED LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER |
| AAZP |
(NON-CORE DATA) CHAMFER LENGTH |
0.0330 INCHES MINIMUM AND 0.0470 INCHES MAXIMUM 0.0400 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
SOLID |
| SR-5 |
DESIGN CONTROL REFERENCE |
1706A270 |
| CQFM |
HARDNESS RATING |
34.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL |
| ABHP |
OVERALL LENGTH |
1.7900 INCHES MINIMUM AND 1.8000 INCHES MAXIMUM |
| CSFM |
(NON-CORE DATA) UNDERCUT DEPTH |
0.0220 INCHES NOMINAL |
| CSYT |
(NON-CORE DATA) CHAMFER ANGLE |
45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL |
| AEPR |
FLANGE OUTSIDE DIAMETER |
2.0000 INCHES NOMINAL |
| SR-5 |
MANUFACTURERS CODE |
13002 |
| ADAR |
BODY OUTSIDE DIAMETER |
1.3160 INCHES MINIMUM AND 1.3200 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758,COMP 4130 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPC |
(NON-CORE DATA) UNDERCUT WIDTH |
0.0600 INCHES MINIMUM AND 0.1300 INCHES MAXIMUM |
| ADAS |
BODY INSIDE DIAMETER |
1.1250 INCHES MINIMUM AND 1.1270 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OR CHROMIUM OVERALL |
