| MRC |
Requirement Statement |
Characteristics |
| ADGA |
OVERALL OUTSIDE DIAMETER |
0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| AGVT |
OUTER RING WIDTH |
0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| ABXV |
BORE DIAMETER |
0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| CTLK |
SELF-ALIGNMENT ANGLE |
10.00 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
TWO SLOTS ACROSS FLATS 0.0800 IN. W,0.0620 IN. DEEP |
| ADZG |
LUBRICATION MATERIAL |
GREASE |
| AAZF |
SHANK STYLE |
INTERNALLY THREADED W/HEXAGON END |
| STYL |
STYLE DESIGNATOR |
DOUBLE ROW, STAGGERED, BALL |
| AGZA |
ALIGNMENT TYPE |
SELF-ALIGNING |
| SR-5 |
DESIGN CONTROL REFERENCE |
123CM10079-1 |
| LMDC |
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| SR-5 |
THE MANUFACTURERS DATA |
|
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| SR-5 |
MANUFACTURERS CODE |
26512 |
| AAJD |
THREAD CLASS |
3B |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AGVU |
INNER RING WIDTH |
0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.9375 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AGXH |
LENGTH FROM BORE CENTER TO SHANK END |
1.4590 INCHES MINIMUM AND 1.4790 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE INNER RING 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES |
| AHAW |
SELF-ALIGNMENT LOCATION |
INTERNAL |
| AGYW |
BEARING SEAL TYPE |
CONTACT |
| AGGY |
SHANK THREAD LENGTH |
0.7500 INCHES NOMINAL |
| ASDB |
WIDTH ACROSS FLATS |
0.4375 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP E52100 INNER RING STEEL COMP E52100 OUTER RING STEEL ROD END BODY RUBBER SYNTHETIC SEAL |
| AGYJ |
SEAL QUANTITY |
2 |
| AAZE |
SHANK DIAMETER |
0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
