| MRC |
Requirement Statement |
Characteristics |
| CWWN |
END NOMINAL DIAMETER |
0.389 INCHES FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
2 PLAIN AXIALLY THROUGH HUB, FIRST END |
| CWWH |
END NOMINAL LENGTH |
0.300 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
3.0625 INCHES NOMINAL |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.371 INCHES FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.185 INCHES |
| CWRM |
FACE NOMINAL WIDTH |
0.245 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| SR-5 |
DESIGN CONTROL REFERENCE |
538D931P2 |
| CWFR |
NOMINAL OVERALL LENGTH |
1.610 INCHES |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.344 INCHES FIRST END |
| CQFM |
HARDNESS RATING |
23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM HUB 50.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM TEETH |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CWXL |
SECOND STEP NOMINAL DIAMETER |
0.393 INCHES FIRST END |
| CWXT |
THIRD STEP NOMINAL DIAMETER |
0.510 INCHES FIRST END |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, SOLID |
| AJLA |
TEETH QUANTITY |
49 |
| CWXG |
SECOND STEP NOMINAL LENGTH |
0.970 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.054 INCHES FIRST END |
| CWXP |
THIRD STEP NOMINAL LENGTH |
0.050 INCHES FIRST END |
| CWZK |
MOUNTING HOLE NOMINAL DIAMETER |
0.125 INCHES AXIALLY THROUGH HUB, FIRST END |
| SR-5 |
MANUFACTURERS CODE |
99207 |
| CWTR |
HUB STYLE DESIGNATOR |
3 STEPS FIRST END |
