| MRC |
Requirement Statement |
Characteristics |
| FEAT |
SPECIAL FEATURES |
COUNTERBORE 2ND END; 0.688 IN. DIA; 0.690 IN. DEEP |
| CWRS |
BORE NOMINAL DIAMETER |
0.560 INCHES BOTH ENDS |
| CWTR |
HUB STYLE DESIGNATOR |
1 GROOVE FIRST END |
| BDTX |
SPLINE PITCH DIAMETER |
0.5000 INCHES NOMINAL BOTH ENDS |
| CWNH |
TOOTH FORM |
STANDARD |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWRM |
FACE NOMINAL WIDTH |
1.249 INCHES |
| CQFM |
HARDNESS RATING |
30.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| CWYL |
NOMINAL DISTANCE FROM END TO FIRST GROOVE |
0.070 INCHES FIRST END |
| MATT |
MATERIAL |
STEEL OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.811 INCHES FIRST END |
| CWXY |
FIRST GROOVE NOMINAL WIDTH |
0.075 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
7 |
| AGJS |
PITCH DIAMETER |
1.1667 INCHES NOMINAL |
| CWPP |
PRESSURE ANGLE |
28.0000 DEGREES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
1.500 INCHES |
| ABSA |
SPLINE QUANTITY |
16 BOTH ENDS |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CWYD |
FIRST GROOVE NOMINAL DIAMETER |
0.617 INCHES FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.686 INCHES FIRST END |
