| MRC |
Requirement Statement |
Characteristics |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
4.8510 INCHES |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNF AXIALLY THROUGH BODY, FIRST END |
| CWSR |
NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM |
1.5850 INCHES BOTH ENDS |
| FEAT |
SPECIAL FEATURES |
TWO PULLER HOLES 1/2-20 UNF 2B THD ON A 3 1/2 IN. DIA BOLT CIRCLE; 1ST END COUNTERBORED 3.3125 IN. DIA BY 0.0625 IN. DP |
| CWNH |
TOOTH FORM |
STANDARD |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
4 THREADED AXIALLY THROUGH BODY, FIRST END |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| CWRS |
BORE NOMINAL DIAMETER |
2.8010 INCHES BOTH ENDS |
| CWZN |
BOLT HOLE CIRCLE NOMINAL DIAMETER |
3.375 INCHES AXIALLY THROUGH BODY, FIRST END |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.813 INCHES FIRST END |
| SR-5 |
MANUFACTURERS CODE |
17572 |
| CWSN |
KEYWAY NOMINAL WIDTH |
0.3750 INCHES BOTH ENDS |
| CWTX |
HUB NOMINAL DIAMETER |
3.875 INCHES FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
1.188 INCHES |
| CWPZ |
HELIX ANGLE |
20.6165 DEGREES |
| CWTR |
HUB STYLE DESIGNATOR |
PLAIN FIRST END |
| MATT |
MATERIAL |
STEEL COMP 1141 OVERALL |
| CWMW |
TEETH TYPE |
SINGLE HELIX |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD SINGLE MATERIAL RESPONSE AND AISI/SAF 1141 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AGJS |
PITCH DIAMETER |
4.6298 INCHES NOMINAL |
| AJLA |
TEETH QUANTITY |
39 |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
28 AXIALLY THROUGH BODY, FIRST END |
| CWNM |
TOOTH DIRECTION |
RIGHT |
| SR-5 |
DESIGN CONTROL REFERENCE |
P11305 |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.2500 INCHES AXIALLY THROUGH BODY, FIRST END |
