| MRC |
Requirement Statement |
Characteristics |
| CWTR |
HUB STYLE DESIGNATOR |
PINNED FIRST END |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| AGJS |
PITCH DIAMETER |
2.9167 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
10.0 ROCKWELL C MINIMUM AND 20.0 ROCKWELL C MAXIMUM OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| AJLA |
TEETH QUANTITY |
140 |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.957 INCHES |
| SR-5 |
MANUFACTURERS CODE |
19200 |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| SR-5 |
THE MANUFACTURERS DATA |
|
| CWRM |
FACE NOMINAL WIDTH |
0.125 INCHES |
| AAQL |
BODY STYLE |
PLAIN, WITH LIGHTENING HOLES |
| CWPP |
PRESSURE ANGLE |
14.5000 DEGREES |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.312 INCHES FIRST END |
| CWFR |
NOMINAL OVERALL LENGTH |
0.437 INCHES |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| CWRS |
BORE NOMINAL DIAMETER |
0.313 INCHES BOTH ENDS |
| SR-5 |
DESIGN CONTROL REFERENCE |
7604748 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS 6,TYPE C FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CMLM |
MOUNTING HOLE THREAD QUANTITY PER INCH |
32 TRANSVERSELY THROUGH HUB, FIRST END |
| CWTX |
HUB NOMINAL DIAMETER |
0.625 INCHES FIRST END |
