| Mfg. Part # | Mfg. Name | CAGE | RNCC | RNVC | ISC | MSDS | SADC | DAC | HCC |
|---|---|---|---|---|---|---|---|---|---|
| 693310 | ONTIC ENGINEERING & MANUFACTURING | 45934 | 3 | 2 | 2 | ||||
| 693310 | HAMILTON SUNDSTRAND CORPORATION | 99167 | 3 | 9 | 2 |
| MRC | Requirement Statement | Characteristics |
|---|---|---|
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWFR | NOMINAL OVERALL LENGTH | 0.250 INCHES |
| SR-5 | DESIGN CONTROL REFERENCE | 693310 |
| MATT | MATERIAL | STEEL COMP 4617 OVERALL |
| CWNH | TOOTH FORM | STANDARD |
| SR-5 | MANUFACTURERS CODE | 45934 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| SR-5 | THE MANUFACTURERS DATA | |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.597 INCHES |
| CWSF | NOMINAL RADIUS | 0.438 INCHES BOTH ENDS |
| CQFM | HARDNESS RATING | 80.0 ROCKWELL A MINIMUM AND 83.0 ROCKWELL A MAXIMUM OVERALL |
| CWRM | FACE NOMINAL WIDTH | 0.188 INCHES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.030 INCHES BOTH ENDS |
| ANTP | BORE STYLE | FLATTED SIDES BOTH ENDS |
| AAQL | BODY STYLE | WEBBED, SOLID |
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| AJLA | TEETH QUANTITY | 50 |
| CWTX | HUB NOMINAL DIAMETER | 0.625 INCHES BOTH ENDS |
| AGJS | PITCH DIAMETER | 2.5000 INCHES NOMINAL |
