| MRC |
Requirement Statement |
Characteristics |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CTQY |
MOUNTING HOLE TYPE AND QUANTITY |
1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
0.834 INCHES |
| CWNH |
TOOTH FORM |
STANDARD |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB |
| ABSX |
ATTACHMENT METHOD |
MOUNTING HOLE |
| CWRS |
BORE NOMINAL DIAMETER |
0.251 INCHES BOTH ENDS |
| CWWN |
END NOMINAL DIAMETER |
0.435 INCHES FIRST END |
| SR-5 |
THE MANUFACTURERS DATA |
|
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| ANTP |
BORE STYLE |
PLAIN BOTH ENDS |
| CQFM |
HARDNESS RATING |
262.0 BRINELL STANDARD NOMINAL OVERALL |
| SR-5 |
MANUFACTURERS CODE |
27914 |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CMLK |
MOUNTING HOLE THREAD SERIES DESIGNATOR |
UNC TRANSVERSELY THROUGH HUB, FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.441 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.023 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
38 |
| CQLT |
MOUNTING HOLE NOMINAL THREAD SIZE |
0.138 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| CWRM |
FACE NOMINAL WIDTH |
0.060 INCHES |
| AGJS |
PITCH DIAMETER |
0.7888 INCHES MINIMUM AND 0.7916 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
GROOVE LOCATED ON 1ST END HUB 0.020 IN. W,0.405 IN. DIA |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,CLASS303 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWWH |
END NOMINAL LENGTH |
0.420 INCHES FIRST END |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL |
| SR-5 |
DESIGN CONTROL REFERENCE |
A238243 |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
0.625 INCHES FIRST END |
