| MRC |
Requirement Statement |
Characteristics |
| BDTX |
SPLINE PITCH DIAMETER |
0.4583 INCHES NOMINAL FIRST END |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.200 INCHES FIRST END |
| AJLA |
TEETH QUANTITY |
32 |
| CWRB |
BODY RECESS NOMINAL DEPTH |
0.255 INCHES SECOND END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
3.363 INCHES |
| FEAT |
SPECIAL FEATURES |
2ND END 1ST COUNTERBORE DIA 0.625 IN. DEPTH 0.420 IN.; 2ND CTRBORE DIA 0.595 IN. BY 0.330 IN. DEPTH |
| CWNH |
TOOTH FORM |
STUB |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB, RECESSED BODY |
| CWWH |
END NOMINAL LENGTH |
1.465 INCHES FIRST END |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.060 INCHES FIRST END |
| MATT |
MATERIAL |
STEEL OVERALL |
| AAQL |
BODY STYLE |
PLAIN, SOLID |
| CWRM |
FACE NOMINAL WIDTH |
0.375 INCHES |
| CWWN |
END NOMINAL DIAMETER |
0.810 INCHES FIRST END |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
1.525 INCHES FIRST END |
| ANTP |
BORE STYLE |
INVOLUTE SPLINE BOTH ENDS |
| TMQY |
FURNISHED ITEMS AND QUANTITY |
1 PLUG |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AM56274 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AGJS |
PITCH DIAMETER |
3.2000 INCHES NOMINAL |
| CWRS |
BORE NOMINAL DIAMETER |
0.527 INCHES BOTH ENDS |
| ABSA |
SPLINE QUANTITY |
11 BOTH ENDS |
| CQFM |
HARDNESS RATING |
25.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM HUB 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM TEETH |
