| MRC |
Requirement Statement |
Characteristics |
| CWWN |
END NOMINAL DIAMETER |
0.249 INCHES FIRST END |
| AGJS |
PITCH DIAMETER |
2.1865 INCHES MINIMUM AND 2.1875 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| AJLA |
TEETH QUANTITY |
210 |
| ANTP |
BORE STYLE |
PLAIN FIRST END |
| CWRB |
BODY RECESS NOMINAL DEPTH |
0.140 INCHES FIRST END |
| CWPP |
PRESSURE ANGLE |
20.0000 DEGREES |
| SR-5 |
DESIGN CONTROL REFERENCE |
947353-1 |
| FEAT |
SPECIAL FEATURES |
ONE 0.131 IN. DIA UNTHD HOLE ON 0.792 IN.BOLT CIRCLE THROUGH GEAR BOD Y AND ONE PIN 0.0930 IN. DIA BY 0.270 IN. LG ON 1.608 IN. BOLT CIRCLE THRO UGH GEAR BODY,130 DEG FROM UNTHD HOL E |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CWNH |
TOOTH FORM |
STANDARD |
| CWCD |
NOMINAL OUTSIDE DIAMETER |
2.207 INCHES |
| STYL |
STYLE DESIGNATOR |
PROTRUDING HUB, RECESSED BODY |
| CWWH |
END NOMINAL LENGTH |
0.170 INCHES FIRST END |
| SR-5 |
THE MANUFACTURERS DATA |
|
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 OVERALL |
| CWTR |
HUB STYLE DESIGNATOR |
1 STEP FIRST END |
| CWQL |
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END |
0.265 INCHES FIRST END |
| AAQL |
BODY STYLE |
WEBBED, OFFSET, SOLID |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/9,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CWRM |
FACE NOMINAL WIDTH |
0.105 INCHES |
| CWWS |
FIRST STEP NOMINAL LENGTH |
0.095 INCHES FIRST END |
| ABSX |
ATTACHMENT METHOD |
CLAMP |
| CWRS |
BORE NOMINAL DIAMETER |
0.187 INCHES BOTH ENDS |
| CWXB |
FIRST STEP NOMINAL DIAMETER |
1.830 INCHES FIRST END |
| SR-5 |
MANUFACTURERS CODE |
64547 |
| CWWK |
PRECISION CLASSIFICATION |
QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWFR |
NOMINAL OVERALL LENGTH |
0.370 INCHES |
