| MRC |
Requirement Statement |
Characteristics |
| PMWT |
III PRECIOUS MATERIAL AND WEIGHT |
0.079 GOLD GRAINS, TROY AND 0.079 SILVER GRAINS, TROY |
| CXCL |
INCLUDED CONTACT TYPE |
ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CSCF |
TERMINAL TYPE |
CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK |
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE |
0.442 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| CSPT |
SHELL MATERIAL |
ALUMINUM ALLOY |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AFQW |
MATING END QUANTITY |
1 |
| AEBW |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT |
1.156 INCHES NOMINAL |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILC38999 |
| ADZC |
ENVIRONMENTAL PROTECTION |
MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF |
| CXCG |
INCLUDED CONTACT QUANTITY |
79 SINGLE MATING END SINGLE CONTACT GROUPING |
| AAQL |
BODY STYLE |
STRAIGHT SHAPE, EXTERNAL COUPLING |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MS27508E20B35PB |
| AFRV |
CONNECTOR LOCKING METHOD |
BAYONET PIN |
| PMLC |
III PRECIOUS MATERIAL AND LOCATION |
CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CQTZ |
CONTACT MATERIAL |
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| ABHP |
OVERALL LENGTH |
0.697 INCHES NOMINAL |
| AFQZ |
CONTACT REMOVABILITY |
REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRN |
POLARIZATION METHOD |
KEY, MULTIPLE KEY GROOVE |
| ABMK |
OVERALL WIDTH |
1.453 INCHES MAXIMUM |
| AFQX |
CONTACT POSITION ARRANGEMENT STYLE |
20-35 SINGLE MATING END |
| ABKW |
OVERALL HEIGHT |
1.453 INCHES MAXIMUM |
| SR-1 |
MANUFACTURERS CODE |
96906 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-38999 GOVERNMENT SPECIFICATION |
| CQYH |
CONTACT SURFACE TREATMENT |
GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| AEHA |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH |
1.156 INCHES NOMINAL |
| CQTM |
TERMINAL LOCATION |
BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT |
SHELL TYPE |
SOLID |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| PRMT |
III PRECIOUS MATERIAL |
GOLD AND SILVER |
| AFRP |
INSERT POSITION IN DEG |
330.0 |
| CSWM |
SHELL SURFACE TREATMENT |
CADMIUM |
