| MRC |
Requirement Statement |
Characteristics |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED MOUNTING HOLES |
| AEBK |
III MAXIMUM RF CURRENT RATING AT HIGHEST RATED FREQUENCY IN RMS AMPS |
6.2 |
| CQBF |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP |
2000.0 MEGOHMS |
| SR-1 |
SPEC/STD CONTROLLING DATA |
|
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
2.625 INCHES NOMINAL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-C-5/12 GOVERNMENT SPECIFICATION |
| AEBL |
III HIGHEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
3000.0 |
| AEBM |
III MAXIMUM RF CURRENT RATING AT LOWEST RATED FREQUENCY IN RMS AMPS |
1.2 |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
2.250 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
1.780 INCHES NOMINAL |
| ADAQ |
BODY LENGTH |
2.280 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
2 THREADED STUD |
| ADAT |
BODY WIDTH |
1.270 INCHES NOMINAL |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
5000.0 AC-PEAK SINGLE SECTION |
| CRTP |
TOLERANCE RANGE PER SECTION |
-2.00 TO 2.00 PERCENT SINGLE SECTION |
| AEBV |
UNTHREADED MOUNTING HOLE DIAMETER |
0.200 INCHES NOMINAL |
| CWJK |
CASE MATERIAL |
PLASTIC |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
1.270 INCHES NOMINAL |
| AEBP |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH |
1.620 INCHES NOMINAL |
| AEBT |
TERMINAL DIAMETER |
0.190 INCHES NOMINAL |
| SR-1 |
MANUFACTURERS CODE |
81349 |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 70.0 DEG CELSIUS MAXIMUM |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
0.0010 |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
3.090 INCHES NOMINAL |
| CWPK |
INSULATION RESISTANCE AT REFERENCE TEMP |
7500.0 MEGOHMS |
| CRDN |
TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS |
0.0 TO 70.0 SINGLE SECTION |
| SR-1 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
CM70FN112GM1 |
| AAQL |
BODY STYLE |
W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| AEBN |
III LOWEST FREQUENCY AT WHICH RF CURRENT RATING APPLIES IN KILOHERTZ |
100.0 |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
1100.000 PICOFARADS SINGLE SECTION |
| SR-1 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE |
MILC5-12 |
| ABJT |
TERMINAL LENGTH |
0.470 INCHES NOMINAL |
