| MRC |
Requirement Statement |
Characteristics |
| CRTP |
TOLERANCE RANGE PER SECTION |
-20.00 TO 20.00 PERCENT 1ST SECTION -20.00 TO 20.00 PERCENT 2ND SECTION |
| AEBU |
TERMINAL HEIGHT FROM BODY |
0.969 INCHES NOMINAL |
| AKEJ |
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR |
UNC |
| CWJK |
CASE MATERIAL |
METAL |
| ABKW |
(NON-CORE DATA) OVERALL HEIGHT |
4.391 INCHES NOMINAL |
| CQBQ |
CAPACITANCE VALUE PER SECTION |
10.000 MICROFARADS ALL SECTIONS |
| CQWM |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION |
200.0 DC ALL SECTIONS |
| AARG |
RELIABILITY INDICATOR |
NOT ESTABLISHED |
| AAQL |
BODY STYLE |
W/THD MTG HOLE(S)/STUD(S) TERMINAL(S) ON ONE SURFACE |
| BWGP |
SECTION QUANTITY |
2 |
| ADAQ |
BODY LENGTH |
1.656 INCHES NOMINAL |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 THREADED MOUNTING STUDS |
| CWPM |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT |
1.0000 |
| TEST |
TEST DATA DOCUMENT |
18876-9003696 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| ABMK |
(NON-CORE DATA) OVERALL WIDTH |
1.500 INCHES NOMINAL |
| TTQY |
TERMINAL TYPE AND QUANTITY |
4 WIRE HOOK/LOOP |
| CBBL |
FEATURES PROVIDED |
HERMETICALLY SEALED CASE |
| AEBQ |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH |
0.359 INCHES NOMINAL |
| CQJJ |
NONDERATED OPERATING TEMP |
-55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| AEBZ |
SCHEMATIC DIAGRAM DESIGNATOR |
NO COMMON OR GROUNDED ELECTRODE(S) |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| AEBY |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH |
1.000 INCHES NOMINAL |
| ADAU |
BODY HEIGHT |
3.500 INCHES NOMINAL |
| ADAT |
BODY WIDTH |
1.500 INCHES NOMINAL |
| ABHP |
(NON-CORE DATA) OVERALL LENGTH |
1.656 INCHES NOMINAL |
