| MRC |
Requirement Statement |
Characteristics |
| ABNC |
FLAT HEIGHT |
0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES SINGLE MOUNTING FACILITY |
| CTHF |
CONTACT LOAD CURRENT RATING |
125.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL 125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CRJH |
SWITCH ACTUATOR INDEXING POSITION QUANTITY |
12 SINGLE ACTUATOR |
| CRSJ |
SHAFT TYPE |
ROUND, FLATTED SINGLE ACTUATOR |
| AJZE |
SWITCH CONTACT BASIC DESIGN |
NONPILE-UP SYMMETRICAL |
| ABHP |
OVERALL LENGTH |
2.005 INCHES MAXIMUM |
| AXGY |
MOUNTING METHOD |
THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| ABNB |
FIRST FLAT LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV |
OVERALL DIAMETER |
0.765 INCHES MAXIMUM |
| CSHW |
CONTACT SWITCHING ACTION |
BREAKS BEFORE MAKES EACH SECTION REAR |
| AFBH |
INDIVIDUAL SECTION QUANTITY |
2 |
| AKPX |
POLE QUANTITY |
1 EACH SECTION REAR |
| CTDN |
SWITCH ACTUATOR STOP DEVICE TYPE |
FIXED STOP SINGLE ACTUATOR |
| AEFP |
NONTURN DEVICE RADIUS |
0.260 INCHES NOMINAL AT 1:00 O'CLOCK |
| AKPY |
THROW QUANTITY |
12 EACH SECTION REAR |
| ABXF |
SHAFT LENGTH |
0.647 INCHES MINIMUM AND 0.727 INCHES MAXIMUM SINGLE ACTUATOR |
| STYL |
STYLE DESIGNATOR |
TAP, CIRCULAR, BUSHING MOUNT |
| CSCF |
TERMINAL TYPE |
TAB, SOLDER LUG |
| AFDC |
NONTURN DEVICE TYPE |
PIN AT 1:00 O'CLOCK |
| CQMK |
CONTACT VOLTAGE RATING IN VOLTS |
115.0 AC AT SEA LEVEL 30.0 DC AT SEA LEVEL |
| CQRQ |
III SHAFT FLAT/SLOT ANGULAR LOCATION |
280.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| CSLC |
SWITCH ACTUATOR POSITIONING INCREMENT |
30.0 DEGREES SINGLE ACTUATOR |
| ABFE |
III HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION |
DUSTPROOF |
| CSMW |
III DETENT ROTATIONAL TORQUE RANGE |
5.000 TO 32.000 INCH-OUNCES SINGLE ACTUATOR |
| ABWV |
SHAFT DIAMETER |
0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF SINGLE MOUNTING FACILITY |
| AASA |
THREAD LENGTH |
0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
