| MRC |
Requirement Statement |
Characteristics |
| CQFM |
HARDNESS RATING |
25.0 SHORE DUROMETER A MINIMUM AND 35.0 SHORE DUROMETER A MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6855,CLASS 2,GRADE 30 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABVL |
APERTURE DIAMETER |
1.406 INCHES NOMINAL |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
0.187 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| AECS |
BOLT HOLE QUANTITY |
4 |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.250 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SOLID SINGLE OR COMPOSITION |
| SR-5 |
THE MANUFACTURERS DATA |
|
| SR-5 |
MANUFACTURERS CODE |
82577 |
| ABHP |
OVERALL LENGTH |
1.625 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| ABMK |
OVERALL WIDTH |
1.625 INCHES MINIMUM AND 1.655 INCHES MAXIMUM |
| SR-5 |
DESIGN CONTROL REFERENCE |
3105023-1-1 |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.062 INCHES NOMINAL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.250 INCHES NOMINAL |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
0.187 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
| AAUB |
HOLE DIAMETER |
0.120 INCHES NOMINAL |
| MATT |
MATERIAL |
RUBBER OVERALL |
