| MRC |
Requirement Statement |
Characteristics |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
2.000 INCHES NOMINAL |
| ADPW |
OUTSIDE CORNER RADIUS |
0.750 INCHES NOMINAL |
| ADUF |
APERTURE LENGTH |
9.250 INCHES NOMINAL |
| MATT |
MATERIAL |
RUBBER CHLOROPRENE CLASS CR OVERALL |
| CQFM |
HARDNESS RATING |
35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL |
| ADUE |
APERTURE WIDTH |
7.000 INCHES NOMINAL |
| AECS |
BOLT HOLE QUANTITY |
18 |
| ADVM |
CROSS-SECTIONAL THICKNESS |
0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| ADVE |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH |
1.281 INCHES NOMINAL |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
2.000 INCHES NOMINAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
SOLID SINGLE OR COMPOSITION |
| ADVD |
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH |
1.156 INCHES NOMINAL |
| ADPQ |
INSIDE CORNER RADIUS |
0.125 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-6855,CL 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABMK |
OVERALL WIDTH |
8.281 INCHES MINIMUM AND 8.344 INCHES MAXIMUM |
| AAUB |
HOLE DIAMETER |
0.189 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
10.531 INCHES MINIMUM AND 10.594 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
NON-CIRCULAR |
